点击图片查看原图
Product Description
Mobil DTE FM Series oils are high performance lubricants designed to satisfy a wide range of multi-use equipment requirements for the food processing and packaging industry. These lubricants are qualified as NSF H1 type lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact. The lubricants are tasteless, odourless, premium quality lubricants formulated with non-toxic NSF/FDA food grade additives and base oils. The additive system provides good wear protection, excellent oxidation stability and protection against rust. They provide good system cleanliness, long oil/filter life, and optimum equipment protection. The Mobil DTE FM Series oils are excellent gear, bearing and circulating oils. They are also suitable for handling the critical requirements of hydraulic system components such as close clearance servo-valves and the high accuracy numerically controlled (NC) machine tools. These products meet the most rigorous performance requirements of a wide range of system and component manufacturers using various multi-metallurgy designs allowing a single product with outstanding performance characteristics.
The Mobil DTE FM Series oils have high ratings in the FZG Gear Test demonstrating their excellent protection against wear and scuffing. This allows their use in systems other than hydraulics that may contain gears and bearings. The naturally high viscosity index of the base oils ensures outstanding performance over a wide temperature range.
Features and Benefits
Features
Advantages and Potential Benefits Non-Toxic Formulation Allows use in food packaging and processing applications Very Good Anti-wear Properties Reduces wear
Extends equipment life Excellent Oxidation Stability Provides long oil and equipment life
Extends filter life High Level Corrosion Protection Prevents internal hydraulic system corrosion
Reduces negative effects of moisture in systems
Provides corrosion protection of multi-metallurgy component designs Meets a Wide Range of equipment requirements Multi-service applications - One product can replace several
Minimises inventory requirements
Reduced potential for product misapplication Excellent Air Separation Characteristics Reduces foaming and it's negative effects Very Good Water Separation Properties Protects systems where small quantities of moisture are present
Readily separates larger quantities of water
Applications
Suitable for multi-service applications in the lubrication of machinery used in all food processing industries, fish processing and met packing plants Excellent gear, bearing, circulating system and hydraulic oils Compressors and vacuum pumps handling air and inert gasses Air line lubricators Systems requiring a high degree of load-carrying capability and anti-wear protection Mobil DTE FM 220, 320 and 460 are recommended for freezer plants and for outdoor applications due to their low temperature properties and high temperature stability Machines employing a wide range of components using various metallurgy
Back to Top
Specifications and Approvals
Meets or Exceeds the following industry specifications
Mobil DTE FM 32
Mobil DTE FM 46
Mobil DTE FM 68
Mobil DTE FM 100
Mobil DTE FM 150 FDA 21 CFR 178.3570XXXXXNSF H1XXXXX
Meets or Exceeds the following industry specifications
Mobil DTE FM 220
Mobil DTE FM 320
Mobil DTE FM 460
Mobil DTE FM 680 FDA 21 CFR 178.3570XXXXNSF H1XXX
Typical Properties
Mobil DTE FM 32
Mobil DTE FM 46
Mobil DTE FM 68
Mobil DTE FM 100
Mobil DTE FM 150 ISO Grade 324668100150Viscosity, ASTM D 445 cSt @ 40º C 31.9 45.568.596.7155.5cSt @ 100º C 5.5 6.88.7 10.917.0Viscosity Index, ASTM D 2270 106 105101 97118Specific Gravity @ 15.6º C/15.6º C, ASTM D 4.520.862 0.8680.873 0.8780.869Copper Strip Corrosion, ASTM D 1301A 1A1A 1A1ARust Characteristics Proc. A, ASTM D 665 PassPassPassPassPassPour Point, ºC, ASTM D 97-12 -9-12 -18-12Flash Point, ºC, ASTM D 92212 226228 246250FZG, DIN 51354, Fail Stage1112+12+12+12+4-Ball wear, ASTM D 4172, Scar Dia, 20Kg, 54º C, 1800 rpm, 1 hr, mm0.250.250.250.250.26
Mobil DTE FM 220
Mobil DTE FM 320
Mobil DTE FM 460
Mobil DTE FM 680 ISO Grade 220 Viscosity, ASTM D 445 cSt @ 40º C 214.3325.8439.5670.0cSt @ 100º C 24.534.243.461.2Viscosity Index, ASTM D 2270 143 148152159Specific Gravity @ 15.6º C/15.6º C, ASTM D 4.520.854 0.8520.8520.853Copper Strip Corrosion, ASTM D 1301A 1A1A1ARust Characteristics Proc. A, ASTM D 665 PassPassPassPassPour Point, ºC, ASTM D 97-21 -30-36-39Flash Point, ºC, ASTM D 92246 272284278FZG, DIN 51354, Fail Stage12+12+12+12+4-Ball wear, ASTM D 4172, Scar Dia, 20Kg, 54º C, 1800 rpm, 1 hr, mm0.250.250.300.30
